|CNV-100||RS-485 2-wire to 4-wire Converter|
RS-485 2-Wire to 4-Wire Converter—CNV-100
Ensure connectivity of RS-485 devices! The CNV-100 enables interoperability of RS485 2-wire and 4-wire multi-point data communication networks. The CNV-100 connects 2-wire devices to 4-wire systems, or 4-wire devices to 2-wire systems. LEDs flash to confirm data transmit/receive at both 2-wire and 4-wire sides.
The CNV-100 RS-485 (EIA-485) interfaces conform to the Modbus standard for RS-485 serial data communications. In general, it can be used with any protocol that adheres to the RS-485 standard operating at baud rates of 9600, 19.2k or 38.4k bps.
Power Monitoring and Control
The CNV-100 has been tested with Square D PowerLogic meters, Sepam relays and Masterpact breakers (with Micrologic trip units), all from Schneider Electric, as well as Modbus devices from other manufacturers.
The CNV-100 is well-suited for automation systems with a variety of RS-485-based protocols, such as Modbus RTU and Profibus.
The CNV-100 has been used by BMS suppliers and system integrators for devices using BACnet as well as various proprietary protocols.
Reliable operation. The CNV-100 uses proven technology. Thousands of devices are in operation since its introduction in 2003.
No setup needed. The CNV-100 operates automatically for any of its supported baud rates. No DIP switches to set!
Available now—IN STOCK! The CNV-100 is stocked in quantity in our factory and is available for immediate shipment.
Low price—$189.00 (USD)!
- Bridges 2-wire and 4-wire RS-485 devices/networks
- Operates at communication speeds of 9600, 19200, or 38400 bps
- Accepts 24 Vdc control power
- NO configuration needed!
- Standard DIN-rail mounting
- UL Listed, FCC, RoHS compliance
CNV-100 Instruction Manual