|STR-100||Satellite Time Reference, outputs DCF77, 1per10|
|STR-100/IRIG-B||Satellite Time Reference, outputs IRIG-B|
|STR-IDM||IRIG-B Distribution Module (IDM) for STR-100/IRIG-B|
GPS Time Sync—STR-100 Satellite Time Reference
The STR-100 Satellite Time Reference is a microprocessor-based device that accepts GPS time signals from a smart antenna or receiver and outputs a time synchronization signal to power system devices for sequence of events recording (SER) applications. The GPS time source may be a Trimble Acutime™ GG GPS “smart antenna” or an amplitude-modulated IRIG-B signal. The STR converts this time data to a DCF77 or 1per10 protocol signal to provide time synchronization for up to 32 devices, including PowerLogic meters and Sepam relays by Schneider Electric, Eaton and Siemens.
The STR-100 Satellite Time Reference distributes precision time signals to monitoring devices in modern data center Electrical Power Monitoring Systems (EPMS). Outputs include IRIG-B (DCLS), DCF77 and 1per10. [ More ]
Power SCADA for Process Industries
The STR-100 Satellite Time Reference distributes precision time signals to relays, meters, PLCs and event recorders in supervisory control and data acquisition systems in continuous processes such as refineries and water treatment plants. [ More ]
Micro-Grid and Alternative Energy
The STR-100 Satellite Time Reference distributes precision time signals to devices in micro-grids and alternative energy networks, such as wind, solar and fuel cells. [ More ]
Accurate time synchronization. Outputs time signal with an accuracy of +/- 50 microseconds.
Versatile. IRIG-B and DCF77 are widely used in electric utility, industrial, healthcare and data center applications for sequence of events recording.
IRIG-B Distribution Enhanced. The optional STR-IDM simplifies wiring of IRIG-B time synchronization signals and allows daisy-chain topology to save cable and labor costs. Used with the PLX-24V or STR-100/ IRIG-B Satellite Time Reference, the IDM enables the distribution of an IRIG-B signal over long distances and to multiple devices (up to 8 devices per IDM).
- Accepts Acutime GG antenna output or Modulated IRIG-B
- Time sync outputs: DCF77 or 1per10
- IRIG-B time sync output (model STR-100/IRIG-B)
- IRIG-B Distribution Module (STR-IDM) allows extended distances for IRIG-B
- UL Listed, CE Mark, FCC, RoHS compliance
Poster: Time Sync via PTP (IEEE 1588)
EPMS-HD: Power Management in High Definition DataSheet
Presentation: PTP-Enabled SER
Data Sheet: STR-100 Satellite Time Reference
Product Presentation STR-100 Satellite Time Reference
Instruction Manuals and Specs
IB–Users Guide: STR-100 Satellite Time Reference
IB–Addendum: STR-100/IRIG-B Satellite Time Reference Recorders
IB: IRIG-B Distribution Module (IDM) for PLX-24V or STR-100/IRIG-B
STR Guide Spec (doc)